How to sew a cat bed with a bolster step by step? - briefly
To create a comfortable and inviting cat bed with a bolster, follow these steps: Start by cutting two rectangular pieces of fabric for the base and one long strip for the bolster. Sew the base pieces together, leaving an opening for stuffing. Insert the bolster into the opening, then sew it closed. Finally, add any desired decorative elements like buttons or ribbons to complete the bed.
How to sew a cat bed with a bolster step by step? - in detail
Creating a comfortable and cozy cat bed with a bolster involves careful planning and execution. This step-by-step guide will walk you through the process, ensuring that your feline friend has a luxurious space to relax.
First, gather all necessary materials. You will need:
- Fabric for the bed (cotton or fleece works well)
- Fabric for the bolster (same as the bed or complementary)
- Polyester fiberfill for stuffing
- Scissors
- Pins
- Sewing machine with a suitable needle
- Thread matching your fabric
- Measuring tape
- Marker or chalk for marking the fabric
Begin by measuring and cutting your fabric. For a standard cat bed, you will need:
- Two rectangles of 18" x 24" for the bed base and top
- Two rectangles of 9" x 24" for the bolster sides
- One rectangle of 18" x 9" for the bolster bottom
Next, prepare the bolster. Place the two side rectangles right sides together and sew along the long edges, leaving one short edge open. Turn the tube inside out, so that the seam is hidden. Iron flat.
Now, place the bolster tube and the bottom rectangle right sides together, with the open end of the tube aligned with one short edge of the bottom rectangle. Sew around the three sides, creating a pocket for the stuffing. Turn the bolster right side out, ensuring all corners are properly pushed out. Stuff the bolster evenly with polyester fiberfill, leaving about 1-2 inches unfilled at the open end to allow for closure. Hand sew or use a slip stitch to close the opening.
For the bed base and top, place the two rectangles right sides together and sew around three sides, leaving one short edge open. Turn the fabric right side out, ensuring all corners are properly pushed out. Iron flat.
To attach the bolster to the bed, place the bolster along the long edge of the bed base, with the seam facing inward. Pin in place. Sew a line about 1/2 inch from the edge, securing the bolster to the bed base. Repeat this process for the bed top, ensuring the bolster is securely attached to both the base and top.
Finally, sew the bed base and top together along the three sides, leaving one short edge open. Turn the entire bed right side out through the opening, ensuring all corners are properly pushed out. Stuff the bed evenly with polyester fiberfill, distributing it around the bolster for added comfort. Hand sew or use a slip stitch to close the opening.
Your cat bed with a bolster is now complete. Place it in your cat's favorite spot and watch as they enjoy their new cozy retreat.