How to make a feeder for a cat from a plastic bottle?

How to make a feeder for a cat from a plastic bottle? - briefly

To create a simple feeder for your cat using a plastic bottle, follow these steps: Cut off the bottom of a clean, empty 2-liter plastic bottle, then make several holes around the sides of the remaining bottle using a sharp knife or scissors. Fill the bottle with dry food, and as your cat pushes against it, kibble will dispense through the holes. This DIY feeder is an affordable and eco-friendly way to keep your feline companion fed throughout the day.

How to make a feeder for a cat from a plastic bottle? - in detail

To create a simple and effective feeder for your cat using a plastic bottle, follow these step-by-step instructions:

  1. Gather Materials:

    • A clean, empty 2-liter plastic soda or water bottle with a screw cap.
    • A sharp knife or scissors.
    • A marker or pen.
    • A small nail or awl (optional, for making holes).

  2. Prepare the Bottle:

    • Thoroughly clean and dry the plastic bottle to ensure there are no residual odors that might deter your cat.

  3. Mark the Feeding Holes:

    • Use the marker to draw two or three small circles on the side of the bottle, approximately 1-2 inches below the cap. These will serve as the feeding holes for your cat.

  4. Create the Feeding Holes:

    • Carefully cut out the marked circles using the sharp knife or scissors. Be cautious not to make the holes too large; they should be just big enough for dry cat food to pass through.

  5. Prepare the Bottle Cap:

    • Remove the cap from the bottle and set it aside. You will use this cap to control the flow of food.

  6. Test the Feeder:

    • Fill the bottle with your cat's dry food, ensuring that there is enough space left at the top for the cap to be securely screwed on.
    • Screw the cap back onto the bottle and test the feeder by tilting it slightly. The food should start to fall out of the feeding holes. If the flow is too fast or too slow, adjust the size of the holes accordingly.

  7. Customize the Feeding Rate (Optional):

    • To control the rate at which the food dispenses, you can use a small nail or awl to make tiny holes in the cap. This will allow air to flow through and regulate the speed of the feeding process. Adjust the number and size of these holes based on your cat's eating habits.

  8. Introduce the Feeder to Your Cat:

    • Place the feeder in a location where your cat is comfortable and familiar with its surroundings.
    • Monitor your cat's interaction with the feeder to ensure they understand how it works and are able to access the food easily.

This DIY cat feeder made from a plastic bottle is an affordable and convenient solution for keeping your feline friend well-fed while you are away. By following these detailed steps, you can create a simple yet effective feeding mechanism tailored to your cat's needs.