How to make a doghouse for a cat with your own hands with a scratching post made of plywood drawings with dimensions? - briefly
To create a cat house with a scratching post using plywood, you will need basic carpentry tools and materials such as plywood sheets, screws, sandpaper, and non-toxic paint. The dimensions should be tailored to your cat's size, typically around 16 inches in height, 20 inches in width, and 24 inches in length for the house, with a scratching post of about 24 inches in height.
How to make a doghouse for a cat with your own hands with a scratching post made of plywood drawings with dimensions? - in detail
Creating a cat house with a scratching post from plywood is a practical and rewarding DIY project. This guide will walk you through the process, providing detailed dimensions and steps to ensure a comfortable and engaging space for your feline companion.
First, gather the necessary materials. You will need:
- Plywood sheets (thickness: 12 mm or 1/2 inch)
- Wooden boards for the base and scratching post (thickness: 20 mm or 3/4 inch)
- Screws and wood glue
- Sandpaper (fine and medium grit)
- Paint or varnish (optional, for aesthetics)
- Tools: saw, drill, screwdriver, measuring tape, pencil, and safety gear
Begin by sketching the design on paper. The cat house will consist of a main body with a door, a roof, and an attached scratching post. The dimensions provided are suitable for an average-sized cat but can be adjusted as needed.
Measure and cut the plywood pieces according to the following dimensions:
- Base: 40 cm (length) x 30 cm (width)
- Side walls: 30 cm (height) x 30 cm (width) - 2 pieces
- Front and back walls: 30 cm (height) x 40 cm (length) - 2 pieces
- Roof: 40 cm (length) x 30 cm (width) - 2 pieces (angled to form a peaked roof)
- Door: 15 cm (height) x 15 cm (width)
- Scratching post: 60 cm (height) x 10 cm (diameter)
Assemble the base using the wooden board, ensuring it is sturdy and level. Attach the side walls to the base using screws and wood glue, followed by the front and back walls. Ensure the structure is square and secure.
Next, cut out the door opening in one of the side walls and attach the door using hinges. The door should be slightly smaller than the opening to allow for easy movement.
For the scratching post, attach the wooden board vertically to one of the side walls, ensuring it is secure. Wrap the board with sisal rope or carpet for added texture and durability. The scratching post should be tall enough for the cat to stretch fully while scratching.
Construct the roof by attaching the two angled pieces together at the top, forming a peak. Secure the roof to the top of the cat house using screws and wood glue.
Sand all edges and surfaces to remove any sharp points or rough areas. Apply paint or varnish if desired, allowing it to dry completely before placing the cat house in your home.
Finally, place the cat house in a quiet, easily accessible location. Monitor your cat's interaction with the new structure to ensure it is comfortable and engaging. Regularly check the scratching post for wear and replace the covering as needed to maintain its functionality.
By following these steps and using the provided dimensions, you can create a functional and attractive cat house with a scratching post that your feline friend will love.