How to make a cat trap?

How to make a cat trap? - briefly

To create a humane cat trap, you'll need a sturdy box with an entry point at one end. Place food inside the box to lure the cat in, then carefully lower the door or trigger mechanism once the cat is fully inside. Always ensure the cat is safe and comfortable during the process.

How to make a cat trap? - in detail

To create an effective and humane cat trap, follow these detailed steps:

  1. Materials Needed:

    • A large cardboard box (big enough for the cat to comfortably turn around in)
    • Scissors or a sharp knife
    • Masking tape or duct tape
    • String or fishing line
    • A small weight (like a rock or a heavy object)
    • A can of tuna or another strong-smelling food
    • A soft blanket or towel
  2. Preparation:

    • Ensure the box is clean and free of any sharp edges that could harm the cat.
    • Place the box in an area where you have seen the cat frequently, such as near its favorite hiding spots or feeding areas.
  3. Creating the Entrance:

    • Cut a rectangular hole on one side of the box, approximately 4-5 inches wide and 6-7 inches high. This will serve as the entrance for the cat.
  4. Setting up the Trigger Mechanism:

    • Cut two small slits in the top of the box, about an inch apart from each other. These slits should be located directly above the center of the box.
    • Thread a piece of string or fishing line through one of the slits and tie it to a weight. The weight should be heavy enough to pull the string taut when the cat steps on the trigger.
    • Bring the other end of the string through the second slit, creating a loop that will act as the trigger mechanism.
  5. Placing the Bait:

    • Place the can of tuna or another strong-smelling food at the far end of the box, away from the entrance. This will lure the cat into the trap.
    • Cover the bottom of the box with a soft blanket or towel to make it more comfortable for the cat and prevent it from slipping on the cardboard.
  6. Setting up the Trap:

    • Gently place the weighted string across the entrance hole, ensuring that it is taut and ready to trigger when the cat steps into the box.
    • Make sure the string is securely in place and will not move or slip once the cat enters.
  7. Monitoring the Trap:

    • Keep an eye on the trap from a distance, ensuring you do not startle the cat. You can use binoculars if necessary.
    • Once the cat steps into the box and triggers the string, quickly but carefully approach the box to prevent the cat from escaping.
  8. Handling the Cat:

    • With the box securely in your hands, gently lift it and carry it to a quiet, safe location where you can humanely transfer the cat into a carrier or another container.
    • Be patient and calm throughout the process to minimize stress for the cat.